Donido Logo
Languages
About DONIDO
Modules
Catalogues
Video
Contacts




  • CLEANING-IN-PLACE
  • MILK COOLING IN THE FARMS




  • NEW DEVELOPMENTS
  • MORE PRODUCTION 1    2
  • PROCESS PARAMETERS
  • AUTOMATED CLEANING SYSTEM
  • SEMI-AUTOMATED CLEANING SYSTEM
GENERAL INFORMATION


The Cleaning process in the dairy industry is performed every day and after each technological process. Correctly performed cleaning guarantees product quality and consumers' safety.
The purpose of the Cleaning process is to:
- clean all surfaces that come into contact with products by mechanically removing all visible contaminants;
- achieve chemical cleanliness by removing all visible and microscopic contaminants which can become a source of microorganisms;
- clean all bacteria by chemical and temperature controlled disinfection.
Main parameters controlled by DONI®Pro CIP during the cleaning process:
- flow, its speed and output. The speed and output should be able to ensure a turbulent flow of cleaning solutions to achieve maximum mechanical cleaning effect. The recommended flow speed is between 1m/s and 3m/s. Speeds lower than 1m/s can affect the quality of the process and higher than 3m/s is economically unfounded;
- concentration and temperature of cleaning products. The best balance between the two parameters guarantees the quality of the process and its economic viability. The recommended values for the alkaline cleaning solutions are: concentration 1-2%, temperatures 65 to 90°С; and for the acidic cleaning solutions are: concentration 0.5 to 1.5% and temperature 65 to
75 °С.
- time, necessary for the cleaning process. The time depends on the exact balance of the parameters mentioned above. Usually, each line is treated individually depending on the level of contamination. Maximum level of hygiene must be achieved. Unnecessary time reduction leads to over use of cleaning solutions and increasing time leads to increased energy consumption.
DONI®Pro CIP is DONIDO's universal module for constructing of centralised and decentralised cleaning systems with up to 6 modules. DONI®Pro CIP can be easily and quickly installed when constructing new or expanding existing systems.
DONI®Pro CIP is supplied in three modifications:
- DONI®Pro CIP A with high level of automation/HLA/ and circulation through a balance tank;
- DONI®Pro CIP M with medium level of automation/MLA/ with circulation through tanks used for storing cleaning solutions;
- DONI®Pro CIP L container type for localised cleaning of separate modules.
We are very happy to help you make the right choice.